HIGH-PERFORMANCE OPTICAL MEASUREMENT EQUIPMENT AND SYSTEM SOLUTION

IMAGING DETECTOR AND RELATED PRODUCT

1" HIGH RESOLUTION CMOS DETECTOR　ISA061

PRODUCT OVERVIEW
1" HIGH RESOLUTION CMOS DETECTOR　ISA061

mscopetypec

ISA061 is a high resolution CMOS detector for 400~1100nm spectral range.

ISA061 uses 2048×2048 pixels 1-inch progressive scan CMOS image sensor (NIR enhanced type). ISA061 is the specified detector of SYNOS' Wide Area FFP Measurement Optics M-Scope type FW, and FFP Measurement Optics For High Power Laser M-Scope type HF.

In combination with SYNOS' optical measurement optics M-Scope series and Optical Beam Analysis Module AP013, it is widely applicable for various optical beam observation and beam profile analysis application in 400~1100nm spectral range.

FEATURE

  • 1" high precision, NIR enhanced type CMOS detector for 400~1100nm spectral range.
  • High resolution of 2048(H)×2048(V) pixels, 5.5µm×5.5μm pixel size
  • High output gradation of 12bit
  • Gigabit ethernet is used as camera I/F.

APPLICATIONS

  • Laser beam observation and laser beam profile analysis in 400~1100nm wavelength range.
    • Specified detector of SYNOS' Wide Area FFP Measurement Optics M-Scope type FW
    • Specified detector of SYNOS' FFP Measurement Optics For High Power Laser M-Scope type HF
  • Other image observation, image processing application, etc.

SUMMARY OF SPECIFICATION

SPECTRAL SENSITIVITY
SUMMERY OF SPECIFICATION
MAIN SPECIFICATIONS OF CMOS SENSOR
Sensor 1" progressive scan CMOS (CMOSIS CMV4000NIR)
Spectral range 400~1100nm
Pixel number 2048(H)×2048(V)/approx. 400M pixels
Sensor pitch (pixel size) 5.5×5.5μm
MAIN SPECIFICATIONS OF DETECTOR UNIT
Camera interface Gigabit Ethernet (GigE vision)
Frame rate 25fps
Shutter Global shutter
Exposure control Programable mode
Gradation 8/12bit ADC
Camera mount C/CS mount
Power supply 12VDC
External dimensions 29mm×29mm×42mm

COMPONENT

STANDARD COMPONENT
  • Detector head : 1
  • Dedicated AC adaptor : 1

RELATED PRODUCT INFORMATION

OPTICAL MEASUREMENT, IMAGE PROCESSING&DATA ANALYSIS SYSTEM
  • Optical Beam Analysis Module AP013
    • Image acquisition, processing, and data analysis system for optical beam analysis. AP013 is composed of personal computer, SYNOS' Optical Beam Analysis Software Optometrics BA Standard, camera driver software, and calibration data set.
  • Synos' optical measurement optics M-Scope series
    • Various types of optics for various optical measurement application are prepared. About M-Scope series, please refer to here.

CATALOG DOWNLOAD