LIGHT SOURCE, ACCESSORIES, PERIPHERALS
LOW COHERENT 850nm SLD LIGHT SOURCE LSS002/850
PRODUCT OVERVIEW
LOW COHERENT 850nm SLD LIGHT SOURCE LSS002/850
This is high power and low coherent light source having center wavelength at 850nm, that is most adequate for measuring insertion loss and other optical parameters for optical inter connection and optical circuit board.
It equips high intensity SLD (Super Luminescent Diode) as Light-emitting device, with center wavelength at 850nm±20nm, wavelength half width 30nm.
Ideal light source for insertion loss measurement, optical characteristic measurement of polymer optical waveguide module for OPCB substrate, optical fiber, and any other optical interconnect application.
FEATURE
- High power and low coherent light source equipping high intensity SLD.
- The center wavelength is 850±20nm and wavelength half width is 30nm. Covers wide bandwidth.
- It can measure such as insertion loss for optical inter-connection and optical circuit boards at the wavelength of VCSEL light source.
- High stability with temperature control. Typically less than 0.5% per one hour and less than 2% per 12 hours with 1 hour aging after power on.
APPLICATION
- Evaluation and optical characteristic measurement for polymer waveguide module for OPCB substrate, optical fiber, etc.
- Insertion loss measurement of polymer optical waveguide for OPCB substrate.
- Optical parameter measurement for optical elements used for optical inter-connection
- Inspection for optical semi-conductors such as optical detectors
- Any other optical parameters measurements in general
SUMMARY OF SPECIFICATION
| Optical output power | approx. 2mW（at APC-SM fiber output edge） |
|---|---|
| Optical output connector | FC connector |
| Device | 850nm high intensity SLD（Super luminescent diode） |
| Center wavelength | 850nm±20nm |
| Wavelength width | typ. 30nm（FWHM） |
| Optical output stability |
|
| Power supply | AC100V±10％、50/60Hz |
COMPONENT
STANDARD COMPONENT
- LSS002/850 main unit １
- AC cable １
- Key for power supply １